Setup and print guide - photoshop cs6 – Xpres SubliJet IQ Epson Stylus Pro 9890 - IQ Pro Photo (Windows ICC Profile Setup): Print & Setup Guide Photoshop CS6 User Manual
Page 6
PAGE 6
of 6 >>
SubliJet-IQ Pro Photo: Epson Stylus Pro 7890 / 9890 - WinProfile
Setup and Print Guide - Photoshop CS6
D. Printer Profile:
select the appropriate ICC profile for your printer
F. Rendering Intent:
Perceptual
G. Check
Black Point Compensation
H. Click
Print Settings (see FIGURE 7). This will open the Properties window (see FIGURE 8).
a. Select your previously saved setting
NOTE: If your previously saved setting is not visible in the drop-down menu, refer to
the Configuration Guide.
b. Click
OK to continue
I. Click
Print when you are ready to print your image (see FIGURE 7)
Congratulations! Photoshop setup is now complete. Remember to select the Epson Stylus Pro 7890 / 9890
each time you are ready to print.
NOTE: If the profile is not visible in the drop-down menu, try restarting Photoshop. If the
profile is still missing after restarting Photoshop, refer to the Installation Guide.
E. Select:
Normal Printing
a
FIGURE 8
b