Motorola GP340 - Manual (Page 26)

<
o
(/)
DELETING A NUISANCE CHANNEL
If a channel continually generates unwanted calls/
noise (a “nuisance” channel), you can temporarily
remove if from the scan list by performing a
Nuisance Channel Delete operation:
1. While the radio is on the Nuisance Chan­
nel, press and hold the Nuisance Delete/
Cancel button until you hear the scan start
alert tone^ ^ n n___________
2. Release the Nuisance Deiete/Cancei but­
ton.
Note: You cannot perform a Nuisance Channel Delete
on a priority channel or if there is only one
remaining channel in the scan list.
ADDING A DELETED NUISANCE CHANNEL
BACK INTO THE SCAN LIST
1. Press the Scan button to stop scanning.
The scan stop alert tone
_____ will sound.
Press the Scan button again to re-start
scanning. The scan start alert tone
n n n n___________ will sound, and the
scan list will contain all programmed chan­
nels.
English 24