Garmin GPSCOM 190 - Manual (Page 66)

• If the map scale is manually changed to a setting
higher than the current AutoZoom setting, auto­
matic map scaling will be cancelled unless the map
scale is manually returned to the current or smaller
AutoZoom setting.
• 11 you leave the map page and miss an automatic
scale adjustment, AutoZoom will assume you want
to keep the last selected map scale and cancel
AutoZoom.
• If the zoom field is active (it has been highlighted
and the enter key has been pressed) when the map
is ready to scale down to the next level, the
AutoZoom feature will be cancelled.
The AutoZoom feature can be turned off through the
map configuration setup described on page 58.
Navigation Page
Bearing to
Waypoint
Track Over
Ground
Relative Bearing
Pointer ~
Estimated
Time Enroute
Current Time
BRG DST
“"325^ 31.0sr
^325^
150%
TRK SPD
3R9
i.B5 k l.SS
“ “ “ f ■
ETE HTK
12:24 0.00Rv
12:27
TIME
130.75 113.00
Dii'tanee to
Waypoint
__ Speed Over
Ground
_ CDl Scale
— Crosstrad: Error
VNAV Altitude
field
The navigation page displays the bearing (BRG) and
distance (DST) to the destination, along with your pre­
sent speed (SPD) and track over ground (TRK).
The GOTO destination is listed above the course
deviation indicator, with your estimated time enroute
(ETE), cross track error (XTK) and time displayed at the
bottom of the page.
A relative bearing pointer, located above the GDI
scale, points in the direction of your destination.
R e f e r e n c e
NinigflUoii
Page
BRG
■>
350-^
TRK
DST
n
— --------------- lYi
150%
SPD
l.SS l.BS
ETE HTK
:
11:03
TIME UNflU
130.75 12^1.30
;/ the GPSCOU 190 is nat
navigating to a destination
waypoint,
the navigation
page will only display your
speed and track over
gwurid.