Accc.ssories – Garmin GPSCOM 190 User Manual
Page 90
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
The cable which is hardw^ired to the adapter connects
to the povver/data connector which is located on the right
side of the GPSCOM 190.
Adapter
Cable
APPENDIX A
Accc.ssories
6-
hmaUalion
To connect the adapter cable to the
GPSCOM 190:
1.
Insert the top iip of the adapter cable into the recess
located above the power/data connector.
2.
Using the attached ring, insert the fastener located at
the bottom of the adapter cable into the hole located
belovwthe power/data connector and turn clockwise
until the adapter cable is locked in place (approximately
one quarter turn.)
Advertising