Dell PowerEdge 2650 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
battery release clip
F i g u r e 1 - 3 . R e m o v i n g a n d I n s t a l l i n g t h e R A I D B a t t e r y
system board
connector
battery
retention tab
11
Replace the cover (see "Replacing the Cover" in your Installation and Troubleshooting
Guide).
12
Reconnect the system to its electrical outlet and turn the system on, including any
attached peripherals.
13
Enter the System Setup program and verify that the setting for the SCSI controller has
changed to reflect the presence of the RAID hardware (see "Using the System Setup
Program" in your User's Guide).
14
Install the RAID software.
See the RAID controller documentation for more information.
1 - 4
I A c t i v a t i n g t h e I n t e g r a t e d R A I D C o n t r o l l e r