Canon LV-7545 - Manual (Page 16)

16
BEFORE OPERATION
TOP CONTROLS AND INDICATORS
Used to open or close
ON-SCREEN MENU
operation. (P17, 18)
MENU BUTTON
READY INDICATOR
SET BUTTON
POWER ON–OFF BUTTON
INPUT BUTTON
WARNING TEMP. INDICATOR LAMP INDICATOR
POINT (VOLUME + / – ) BUTTONS
LAMP REPLACE INDICATOR
Lights green when the
projector is ready to be
turned on.
And flashes green while
in Power Management
mode. (P36) Becomes dim when the
projector is turned on.
And bright when the
projector is in stand-by
mode. Turns to yellow when
the life of projection
lamp draws to an end.
(P39) Flashes red while
internal projector
temperature is too
high. (P38)
Used to select input
source. (P22)
Used to select an item or adjust
value in ON-SCREEN MENU. They
are also used to pan the image in
DIGITAL ZOOM
+/– mode. (P29)
POINT LEFT/RIGHT buttons are
also used as VOLUME +/– buttons.
Used to execute the item
selected. It is also used
to expand / compress
the image in DIGITAL
ZOOM mode. (P29)
Used to turn a projector
on or off. (P19)
Used to adjust zoom.
(P20)
FOCUS BUTTON
Used to adjust focus.
(P20)
ZOOM BUTTON
This projector has CONTROL BUTTONS (TOP CONTROLS) and INDICATORS on its top.
LENS SHIFT BUTTON
Used to select LENS
SHIFT function. (P20)
AUTO PC ADJ. BUTTON
Used to operate AUTO PC
Adjustment function. (P23)
Used to enhance
picture brightness.
(P20)
BRIGHT BUTTON