Canon DR-4010C User Manual
Page 55
Chapter 3
Basic Operation
3-25
3
On the [Other] tab of the ISIS driver properties, set the batch separation setting to
“Patchcode.”
4
From the application, perform scanning with batch separation enabled.
Note
If you are scanning with CapturePerfect, set the Type of batch separation setting to “Scan,
Continue Scanning” or “Skip, Continue Scanning.”
• If “Scan, Continue Scanning” is selected, the patchcode sheet image is also saved and
scanning continues.
• If “Skip, Continue Scanning” is selected and the PATCH T (FILE A) pattern is detected, the
patchcode sheet image is not saved and scanning continues.
IMPORTANT
Make sure to keep the patchcode sheets clean. In particular, the effective area for detecting
patterns should be kept clean. Also, do not fold them or allow them to become creased. If this
happens, the scanner will not be able to read them.