Canon DR-4010C User Manual
Page 63
Advertising
Chapter 3
Basic Operation
3-33
2
Click the [Maintenance] tab.
3
Click [Long Document mode (1,000 mm)].
4
Click [Apply] to change the scanner’s settings.
5
Click [OK] to close [Scanners and Cameras Properties].
6
Turn the scanner OFF and then ON again.
IMPORTANT
• If you are using a SCSI connection, turn OFF the computer and then turn the scanner OFF
and then ON again.
• Wait at least 10 seconds before turning the scanner back ON after it has been turned OFF.
Advertising