Canon MF6500 - Manual (Page 61)

1
2
3
4
TOP
Back Previous Next
2-47
Introduction
Scanning a
Document
Troubleshooting
Appendix
Table of Contents
Index
Advanced Properties
NOTE
The setting items and default values in the [Advanced Properties] tab
vary depending on the type of picture you select.
Appearance Shows the preview of sample image.
[Brightness] Specifies the brightness (–127 to 127).
[Contrast] Specifies the contrast (–127 to 127) (only for
color or grayscale scanning).
[Resolution (DPI)] Selects the scanning resolution in dot per
inch (50 to 600).
[Picture type] Selects the scanning color type ([Color
picture], [Grayscale picture], or [Black and
white picture or text]).
[Reset] Resets all the current settings to their default
values.