Removing the bezel, cover, and front panel, Removing the bezel, cover, and front panel -9 – Dell PowerEdge 2600 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Removing the Bezel, Cover, and Front Panel
This procedure is best performed with the system on its side (see Figure 1-4).
1
Remove the bezel and set it aside:
a Using the system key, unlock the bezel.
b Pull the bezel away from the system so that it is perpendicular to the system (see
Figure 1-4).
c Loosen the thumbscrews to release the bezel (see Figure 1-4).
d Pull the bezel away from the chassis.
Figure 1-4. Removing or Replacing the Front Bezel
thumb screws (2)
mounting
holes (2)
R a c k - t o - T o w e r C o n v e r s i o n G u i d e |
1-9
Advertising