Auralex MiniFusor Sound Diffusor - Manual

MiniFusor
™
/ QuadFusor
™
/ T’Fusor
™
MiniFusor
™
/ QuadFusor
™
/ T’Fusor
™
USER GUIDE
USER GUIDE
938-1212.QuadFusor TFusor MiniFusor User Guide.indd (09/05/2013 - 7:59 AM)
938-1212.QuadFusor TFusor MiniFusor User Guide.indd (09/05/2013 - 7:59 AM)
Thank you for purchasing Auralex ® MiniFusor ™ / QuadFusor ™ / T’Fusor ™ !
These are highly effective acoustic diffusion devices that can be easily wall or ceiling mounted and the QuadFusors
& T’Fusors are also sized to fit 2’x2’ drop ceiling grids.
The MiniFusors, QuadFusors & T’Fusors are supplied with the Auralex EZ-Stick Pro ™ peel & stick tabs.
Be advised that the EZ-Stick Pro Tabs are designed for permanent installations and will damage drywall and
painted surfaces when removed. For installations that require little or no damage to the wall surface we recommend
the use of Auralex EZ-Stick Tabs . See your Authorized Auralex dealer for details.
Mark the target position on your wall or ceiling where the panel will be mounted using small pencil marks, pieces of
masking tape or any similar non marring method. Be sure the wall surface where the EZ-Stick Pro Tabs ™ will adhere
is free of dirt, dust or other oily contaminants. The use of rubbing alcohol to spot clean the wall where the tabs will
adhere is recommended. Avoid the use of household cleaners.
Remove one of the release layers on the EZ-Stick Pro Tabs and affix it to the rear side of the perimeter flange at the
desired locations, usually near the corners.
Thank you for purchasing Auralex ® MiniFusor ™ / QuadFusor ™ / T’Fusor ™ !
These are highly effective acoustic diffusion devices that can be easily wall or ceiling mounted and the QuadFusors
& T’Fusors are also sized to fit 2’x2’ drop ceiling grids.
The MiniFusors, QuadFusors & T’Fusors are supplied with the Auralex EZ-Stick Pro ™ peel & stick tabs.
Be advised that the EZ-Stick Pro Tabs are designed for permanent installations and will damage drywall and
painted surfaces when removed. For installations that require little or no damage to the wall surface we recommend
the use of Auralex EZ-Stick Tabs . See your Authorized Auralex dealer for details.
Mark the target position on your wall or ceiling where the panel will be mounted using small pencil marks, pieces of
masking tape or any similar non marring method. Be sure the wall surface where the EZ-Stick Pro Tabs ™ will adhere
is free of dirt, dust or other oily contaminants. The use of rubbing alcohol to spot clean the wall where the tabs will
adhere is recommended. Avoid the use of household cleaners.
Remove one of the release layers on the EZ-Stick Pro Tabs and affix it to the rear side of the perimeter flange at the
desired locations, usually near the corners.
(Continued on back)
(Continued on back)