Auralex MiniFusor Sound Diffusor - Manual (Page 2)

MiniFusor ™ / QuadFusor ™ / T’Fusor ™ User Guide
MiniFusor ™ / QuadFusor ™ / T’Fusor ™ User Guide
www.Auralex.com | 1-800-959-3343 | [email protected] | Total Sound Control
®
www.Auralex.com | 1-800-959-3343 | [email protected] | Total Sound Control
®
QuadFusor ™
QuadFusor ™
MiniFusor ™
MiniFusor ™
T’Fusor ™
T’Fusor ™
Remove the second layer of release paper from each of the EZ-Stick Pro Tabs , carefully orient the panels position
prior to contact with the wall, then press in place with moderate pressure.
The MiniFusor, QuadFusor & T’Fusor can be mounted using mechanical fasteners such as screws or nails but
careful drilling of the flange will be required. Be sure to use the fastener appropriate for the type of wall construction.
The rear cavity of the MiniFusor, QuadFusor & T’Fusor can be filled with Auralex Mineral Fiber Insulation or
covered with Auralex PlatSheet ™ / PlatFoam ™ for low frequency absorption. When using Mineral Fiber Insulation
use personal safety equipment appropriate for the handling of fiberglass.
For more information or assistance visit Auralex.com or call 800-959-3343
Remove the second layer of release paper from each of the EZ-Stick Pro Tabs , carefully orient the panels position
prior to contact with the wall, then press in place with moderate pressure.
The MiniFusor, QuadFusor & T’Fusor can be mounted using mechanical fasteners such as screws or nails but
careful drilling of the flange will be required. Be sure to use the fastener appropriate for the type of wall construction.
The rear cavity of the MiniFusor, QuadFusor & T’Fusor can be filled with Auralex Mineral Fiber Insulation or
covered with Auralex PlatSheet ™ / PlatFoam ™ for low frequency absorption. When using Mineral Fiber Insulation
use personal safety equipment appropriate for the handling of fiberglass.
For more information or assistance visit Auralex.com or call 800-959-3343