Sheet5, Drawing view62, Drawing view66 – AVF PM-S-FL User Manual
Page 5: Drawing view67, Drawing view98, Drawing view99, Drawing view100, Drawing view103, Drawing view125, Drawing view137
M8 X 20
1.Install tongue in camera mount neck if using with
camera for videoconferencing. Remove if not required
2.If using tongue, Insert mount neck into main pillar
until tongue is approximately 1" from the top of the tv.
You will notice you have a bit of hardware left over
which you may need in the future.
We suggest placing this in a small bag and taping it
inside the bottom back of the main pillar.
If you have any problems,questions or suggestions,
we value your feedback. Toll free 1-877-834-3876
For our latest listing of compatible monitors
email our sales department [email protected]
Largest(6mm)
Hex Key
VIDEO FURNITURE INTERNATIONAL
190 Don Hillock Drive Aurora , Ontario L4G 0G9 www.video-furn.com
Toll Free: 1-877-834-3876 Fax: 905-751-1488 Local: 905-751-1459
Page 5
of 5
Step 4
The Camera mount