AVF PM-S-XL - Manual (Page 2)

Securing the Base to a cart or table Step 1
VIDEO FURNITURE INTERNATIONAL
190 Don Hillock Aurora , Ontario L4G 0G9 www.video-furn.com
Toll Free: 1-877-834-3876 Fax: 1-905-751-1488 Local:905-751-1459
Adding the Mounting Spine
Tighten all 6 nuts securely
Shown Mounting to
VFI cart PL3070
Step 2
Page 2
of 7
3
L
Large Washer
5/16 Carriage Bolt
Table/Cart
Spring Washer
5/16 Nut
9/16 Wrench
or Socket
If your cart/table does not have pre-drilled holes.
See Page 7 for optimal placement of base.
Remove grommet if present, surface must be flat.
1. Insert Mounting Spine into Base as shown
2. Add the back bolts first. Do not tighten till front and back
bolts are in place.
3. Use your 6mm hex key to tighten all 5 bolts
Note: Optional Base cover can be
inserted over-top at the end of Step 2.
see bottom of page 7 for description.
M8 X 12
M8 X 20
2
1
Mounting
Base Part
6mm Hex Key