AVF PM-S-XL - Manual (Page 3)

Attaching TV brackets
5
3
of 7
5.Place XL Brace into the locations at the bottom of the TV brackets while ensuring
Step 3
that it is centred. Use the hex key to tighten until secure.
Note.Have 2 people lift the TV as it can be very heavy and awkward.
1.Place TV face down on blanket or non abrasive surface such as cardboard.
2.Check to see if your TV came with mounting hardware.
If not,we have supplied the most common hardware.
Most TV manuals list the required thread and depth for mounting hardware.
See which bolt length you need by hand tightening only.
3.Place TV brackets so you can see the TV mounting holes through the bracket
and insert bolt through appropriate washer and spring washer for depth adjustment.
4.Use the hex key to tighten until there is resistance, then give a half turn.
DO NOT OVERTIGHTEN AS THIS CAN DAMAGE OR PUNCTURE THE TV
Page 3
4
Optional Spacer mounting
not flat or the mount holes are sunk into
Multiwasher
TV Bracket
the back of the TV. (Rarely used)
Spacer
Spacer is used when the back of TV is
Appropriate
bolt.
Hex Key
VIDEO FURNITURE INTERNATIONAL
190 Don Hillock Aurora , Ontario L4G 0G9 www.video-furn.com
Toll Free: 1-877-834-3876 Fax: 1-905-751-1488 Local:905-751-1459