Hit Products HDC Controller - Manual (Page 12)

12
Rotate the dial to program “START TIMES”.
Choose program A, B or C. To change program
from existing program, push the PRG button.
Use the + and – buttons to adjust to desired start
time. Start times are available every 15 minute
increment of the hour. This represents the time of
day the irrigation cycle will commence. All stations
with programmed run time on this program (A, B
or C) will come on, one at a time, sequentially, on all
active days, commencing at this time of day. Up to
three start times can be scheduled per day.
Push the → button to add another start time or the
PRG button to set the next program.
If all 3 programmed start times are turned “OFF”
then that specific program will not start.
To eliminate a start time, set dial to “START TIMES”.
Use the + button to scroll to 11:45 PM. Then push
the + button once to attain the “OFF” display.
1)
2)
3)
4)
5)
6)
SETTING PROGRAM START TIMES