Hit Products HDC Controller - Manual (Page 13)

This is the setting for establishing how long each
independent “valve” or “station” will be on to irrigate.
Each station will come on in numeric sequence
for this duration as set for each Station Run Time.
13
If two or more programs are to start at the same
time, only the first program will start and run. At
the completion of that program running, the next
program will run, and so on until all multiple
start times are run. This is called “stacking”.
7)
Rotate dial to the “Station Run Times” position.
Choose program A, B or C. To change program from
existing program, push the PRG button.
Press the + or – button to increase or decrease the
length of time you desire this specific station (valve)
to be “ON” each time this valve is activated on this
specific program.
1)
2)
3)
ESTABLISHING INDIVIDUAL
STATION RUN TIMES