Home Styles 5660-595 - Manual (Page 2)

Assembly Instructions 2
IMPORTANT
* Please keep Hex Wrench in a safe place as you may need to tighten up
the Head Cap Bolts in the future.
* Do not tighten up all the bolts until each part is properly assembled.
* Use a soft cloth between these parts and the fl oor.
* After assembly, item must be level to work properly.
STEP 1
Attach Side Frames (C)
and (D) to Seat (B) with
Sleeve Bolts. (see Figure 1)
Attach Back Frame (A) to unit with Head Cap Bolts (80mm)
and Nuts. (see Figure 2)
B E
B F
B
B
B
A
C
B
D
STEP 2
Attach Glider Plates to
Base Frames (E) and (F)
with Head Cap Bolts (60mm),
Metal Washers, Plastic Washers
and Hex Nuts.
(see Figure 3)
Sleeve Bolt
Hex Wrench (4mm)
Hex Wrench
(4mm)
Hex Wrench (5mm)
Hex Wrench
(5mm)
Hex Wrench (5mm)
Head Cap Bolt
(80mm)
Nut
Metal Washer
Plastic Washer
Glider Plate
Key Wrench
Hex Nut
Metal Washer
Metal Washer
Head Cap Bolt
(60mm)
/3
Figure 2
Figure 1
Figure 3