Assembly instructions 3 – Home Styles 5660-595 User Manual
Page 3
Advertising
Assembly Instructions 3
STEP 4
Attach unit from Step 1 to unit from Step 3
with Head Cap Bolts (50mm), Metal Washers,
Plastic Washers and Hex Nuts.
(see Figure 4)
Turn unit to its’ upright position.
STEP 3
Attach Stretchers (G) to Base Frame (E) and (F)
with Head Cap Bolts (75mm) and Cross Dowels.
E
G
E
G
E
E
B
F
Head Cap Bolt
(75mm)
Cross Dowel
/3
Hex Wrench (4mm)
Head Cap Bolt (50mm)
Metal Washer
Metal Washer
Plastic Washer
Metal Washer
Hex Nut
Key Wrench
Figure 4
Advertising
This manual is related to the following products: