Canon CDI-E154-010 - Manual (Page 129)

127
V
iew
ing Images on
a TV set
• A TV set cannot be used in Stitch Assist mode.
• No image will appear on the LCD monitor when the camera is
connected to a TV.
• If the TV is a stereo model, you can plug the audio plug into either
the left or right Audio In jack. Please refer to the TV’s manual for
details.
The video output signal can be switched (NTSC or PAL) to
accommodate different regional standards (p. 52). The default setting
varies between regions.
- NTSC: Japan, U.S.A., Canada, Taiwan and others
- PAL: Europe, Asia (excluding Taiwan), Oceania and others
If the video system is set incorrectly, the camera output may not
display properly.
5 Slide the mode switch to
(Shooting), (Movie) or
(Playback).
6 Press the ON/OFF button until the
indicator blinks green.
The image will appear on the TV. Shoot or
play back images as usual.