Home Styles 5061-20 - Manual (Page 2)

Assembly Instructions 2
Figure 1
/3
IMPORTANT
* Do not tighten up all the bolts until each part is properly assembled.
* You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* Use a soft cloth between these parts and the fl oor.
* After assembly, item must be level to work properly. Use the included adjustable levelers to level.
B A
B A
STEP 1
Place Top Unit (A) upside down on a soft cloth.
Rotate the Plastic Stopper on the front rail of unit
180 degrees. (See Figure 1)
Remove drawer from Top Unit (A)
B C
B
C
B
B B
B
B
D
Tapered
Head Cap Bolt
Plastic Stopper
STEP 2
Attach Legs (B) and (C) to Top Unit (A) with
Tapered Head Cap Bolts (long).
Attach Shelf (D) to unit with with Tapered Head Cap Bolts.
Attach Legs (B) and (C) to unit with Tapered Head Cap Bolts (long)
and Tapered Head Cap Bolts.
Tapered
Head Cap Bolt (long)