Home Styles 5061-20 - Manual (Page 3)

Assembly Instructions 3/3
STEP 3
Remove the Pull Handle that is installed
on the inside of drawer and re-install
it on the outside of the drawer.
STEP 4
Turn the unit over to its’ upright position.
Rotate the Plastic Stopper on the front rail of unit 180 degrees back to
its’ original position.
Slide drawer into place.
To level the unit, adjust the adjustable levelers on the bottom of legs.
(See Figure 2)
Note : Unit must be level to work properly.
Figure 2
Plastic Stopper