Crestron electronic htt-b10x - Manual (Page 18)

InfiNET™ TableTop Controller Crestron HTT-B10X
Configuration Manager Configuration Manager is the view where programmers “build” a Crestron control
system by selecting hardware from the Device Library.
• To incorporate the HTT-B10X into the system, first drag the
C2N-MNETGW (Gateway) from the Wireless Receivers | Wireless
Receivers (RF) folder of the Device Library and drop it in the System
Views. Then drag the HTT-B10X from the infiNET Control Modules |
infiNET Button Panels folder of the Device Library and drop it on the
C2N-MNETGW.
Locating the C2N-MNETGW in the Device Library
Locating the HTT-B10X in the Device Library
• The system tree of the control system displays the device in the appropriate
slot with a default MNET ID as shown in the following illustration.
14 • infiNET™ TableTop Controller: HTT-B10X Operations Guide – DOC. 6583B