myCharge Hub 3000 RFAM-0503 - Manual (Page 3)

4 5
Thanks for choosing myCharge.
Visit mycharge.com/videos/Hub to view
the product demo video!
In The Box
• myCharge Hub 3000 ™
• Micro-USB charging cable
• Owner’s manual
Section I: Quick Start
1. Charge up your Hub 3000 with the included USB to
Micro-USB cord through your computer or USB AC
power adapter.
2. As Hub 3000 charges, the battery icon will flash the color
of the battery level. When the unit is fully charged, the
battery icon will turn solid green. Press the level check
button to see how much power is available.
3. Hub 3000 comes equipped with Apple Lightning and
Micro-USB connectors, as well as a built-in USB port for
use with your own cable. Connect your device(s) to one
of the various inputs available. Charge up to three devices
simultaneously by using all connectors and USB port.
4. When charging through the Apple Lightning connector or
USB port, you must press and hold the Hub 3000 power
button for 3 seconds to begin charging if the Hub is not
already turned on.
5. Unplug your device when it's charged, and go! Your
Hub 3000 will automatically power off after your devices
are unplugged.
Section II: Charging Hub 3000
Connect the included USB to Micro-USB cable through your
computer’s USB port or a USB AC power adapter. Times to
charge the Hub 3000 vary based on what it’s plugged into.
You can expect a full charge from a USB AC power adapter
in about three hours or from a standard notebook USB port
in about six hours.
Charge from your computer
or any USB port
Lightning
connector
Micro-USB
connector
Power & battery level check button
Micro-USB input
USB-A port