myCharge Hub 3000 RFAM-0503 - Manual (Page 4)

6 7
As your Hub charges, the battery icon will flash according
to the energy level:
Solid Green: 100%
Flashing Green: 71–99%
Flashing Yellow: 41–70%
Flashing Red: 0–40%
Note: It is normal for your Hub 3000 to be warm to the
touch while in use.
Section III: Charging Devices
Hub 3000 uses an automatic device detection system for
the micro USB. When devices are plugged in, Hub 3000
provides charging power until they are unplugged or
the Hub 3000 runs out of energy. When charging devices
through the Apple Lightning connector or USB port, if
the Hub 3000 isn't already turned on, press and hold
the battery icon button for 3 seconds to begin charging.
Up to three devices can be charged simultaneously. The
Hub 3000 Apple Lightning connector is compatible with
iPhone 5 and any other devices with a Lightning connector.
The Micro-USB connector and USB ports support the
majority of mobile devices including smartphones, tablets,
Bluetooth headsets, portable navigation devices, MP3
players, and more.
Section IV: Checking Battery Level
To check how much energy is available, press the
battery level check button. The battery icon will
illuminate accordingly:
Green: 71–100%
Yellow: 41–70%
Red: 11–40%
Flashing Red: 0–10%
After 5 seconds, the LED will turn off.
Section V: Maintenance
To keep your Hub operating at its full potential, please do
the following:
1. Re-charge every three months when not in use.
2. Keep dry and away from moist and corrosive materials.
3. To clean, wipe surface with dry cloth.
Section VI: Product Specifications
Battery: 11.2Wh Lithium Ion
Input: Micro-USB: 5VDC, 1.0A
Output:
Apple connector output: 5VDC, 1.0A
Micro-USB output: 5VDC, 500mA
USB output: 5VDC, 1.0A
5VDC, 2.5A Max Total