myCharge Jolt 2000D RFAM-0226 - Manual (Page 3)

4 5
Thanks for choosing myCharge.
Visit mycharge.com/videos/Jolt to view
the product demo video!
In The Box
• myCharge Jolt 2000d ™
• Micro-USB charging cable
• Owner’s manual
Section I: Quick Start
1. Charge up your Jolt 2000d with the included USB to
Micro-USB cord through your computer or USB AC
power adapter.
2. As Jolt 200d charges, the battery icon will flash the color
of the battery level. When the unit is fully charged, the
battery icon will turn solid green. Press the level check
button to see how much power is available.
3. Jolt 2000d comes equipped with an Apple Lightning
connector for iPhone ® 5, and a Micro-USB connector.
Connect your device(s) to one of the various inputs
available. Charge up to two devices simultaneously by
using both connectors.
4. When connecting an iPhone 5 to the Lightning connector,
you must press and hold the Jolt 2000d power button for
3 seconds to begin charging if the Jolt is not already
turned on.
5. To turn off your Jolt simply charge to the desired level,
unplug your devices and the unit will automatically
power down.
Section II: Charging Jolt 2000d
Connect the included USB to
Micro-USB cord through your
computer’s USB port or a USB
AC power adapter. Times to
charge the Jolt 2000d vary
based on what it’s plugged
into. You can expect a full
charge from a USB AC power
adapter in about three hours
or from a standard notebook
USB port in about five hours.
As your Jolt charges, the
battery icon will flash according to the energy level:
Solid Green: 100%
Flashing Green: 71-99%
Flashing Yellow: 41-70%
Flashing Red: 0-40%
Note: It is normal for your Jolt 2000d to be warm to the
touch while in use.
Lightning connector
Charge from your computer
Carabiner
Micro-USB connector
Micro-USB input
Power and battery level check button