myCharge Power Bank 6000 MYC-0603 - Manual (Page 3)

4 5
Thanks for choosing myCharge.
Visit mycharge.com/videos/PowerBank6000 to view
the product demo video!
In The Box
• myCharge Power Bank 6000 ™
• Owner’s manual
• USB-Apple 30-pin charging cable
Section I: Quick Start
1. Charge up your Power Bank 6000 by using the fold-out
prongs on the back of the unit for fast-charging via wall
outlet.
2. As Power Bank 6000 charges, the battery icon will flash the
color of the battery level. When the unit is fully charged,
the battery icon will turn solid green. Press the level check
button to see how much power is available.
3. Power Bank 6000 comes equipped with Apple Lightning
and Micro-USB connectors, an included Apple 30-pin
charging cable, as well a built-in USB port for use with
your own cable. Connect your device(s) to one of the
various inputs available. Charge up to three devices
simultaneously by using all connectors and USB port.
4. When charging through the Apple Lightning connector or
USB port, you must press and hold the Power Bank 6000
power button for 3 seconds to begin charging if the Power
Bank is not already turned on.
5. Unplug your device when it's charged, and go! Your
Power Bank 6000 will automatically power off after your
devices are unplugged.
Section II: Charging
Power Bank 6000
To charge your Power Bank,
simply plug the fold-out wall
prongs into a wall outlet. You
can expect a full charge from
the wall in about three hours.
As your Power Bank charges,
the battery icon will flash
according to the energy level:
Solid Green: 100%
Flashing Green: 71-99%
Flashing Yellow: 41-70%
Flashing Red: 0-40%
Note: It is normal for your Power Bank 6000 to be warm to
the touch while in use.
Charge from the wall
Lightning connector
USB-A port
Power & battery level
check button
Micro-USB connector
Wall prongs