myCharge Power Bank 6000 MYC-0603 - Manual (Page 4)

6 7
Section III: Charging Devices
Power Bank 6000 uses an automatic device detection
system for the micro USB. When devices are plugged in,
Power Bank 6000 provides charging power until they are
unplugged or the Power Bank 6000 runs out of energy.
When charging devices through the Apple Lightning
connector or USB port, if the Power Bank 6000 isn't
already turned on, press and hold the battery icon
button for 3 seconds to begin charging.
Up to three devices can be charged simultaneously. Power
Bank 6000 has an automatic load balancing system that will
prioritize its outputs to optimize charging. In most cases,
your Power Bank will charge 3 devices at once. In the event
that three high-powered devices with depleted batteries
are plugged in the Apple Lightning pin is provided priority,
followed by the USB-A port, and then the Micro-USB
connector. Once the high-powered Apple device (iPhone 5)
nears a full charge, the device connected to the USB-A port
will begin charging. Once charged, the Micro-USB device
will begin charging. Low-powered devices don't draw as
much power, so multiple devices can charge simultaneously.
The Power Bank 6000 Apple Lightning connector is
compatible with iPhone 5 and any other devices with a
Lightning connector. The Micro-USB connector and USB
ports support the majority of mobile devices including
smartphones, tablets, Bluetooth headsets, portable
navigation devices, MP3 players, and more.
Section IV: Checking Battery Level
To check how much energy is available, press the
battery level check button. The battery icon will
illuminate accordingly:
Green: 71-100%
Yellow: 41-70%
Red: 11-40%
Flashing Red: 0-10%
After 5 seconds, the LED will turn off.
Section V: Maintenance
To keep your Power Bank operating at its full potential,
please do the following:
1. Re-charge every three months when not in use.
2. Keep dry and away from moist and corrosive materials.
3. To clean, wipe surface with dry cloth.
Section VI: Product Specifications
Battery: 22.3Wh Lithium Ion
Input:
AC: 100-240 VAC 50/60 Hz
Output:
Apple connector output: 5VDC, 2.1A
Micro-USB output: 5VDC, 500mA
USB output: 5VDC, 1.0A
5VDC, 3.6A Max Total