myCharge Peak 6000 RFAM-0166 User Manual

Page 5

Advertising
background image

8

9

Section VI: Sound Modes

Peak has built-in voice and tone capability. Tone mode
will audibly inform you when devices are plugged in
or disconnected, and when the unit is charging or has
completed charging. Voice mode will verbally inform
you of battery status, when devices are plugged in or
disconnected, and when the unit is charging or has
completed charging.

To disable, enable and/or change the various sound modes

1. Locate the Sound pinhole button underneath the Apple
30-pin connector
2. Plug Peak into your PC
3. Use a paperclip to cycle Voice Tone Silent Voice

If you prefer no sound, toggle to the silent mode - unit will
make no sound when this option is selected. If you prefer
tone mode, toggle until you hear the tone. Finally, if you
prefer language, toggle until you hear a voice.

Peak offers language notifications in 4 languages – English,
French, Spanish and Portuguese. To select a language
locate the language pinhole and use a paperclip to toggle
through the languages until you hear the language you
prefer.

Section VII: Maintenance

To keep Peak operating at its full potential, please do the
following:

1. Re-charge every three months when not in use.
2. Keep dry and away from moist and corrosive materials.
3. To clean, wipe surface with dry cloth.

Section VIII: Product Specifications

Battery: 6000 mAh Lithium Polymer
Input:
AC: 100-240 VAC 50/60 Hz
USB-A: 5 VDC, 2.1 A
Output:
Apple 30-pin: 5 V, 2.1 A
USB-A: 5 V, 1.0 A
Micro-USB: 5 V, 1.0 A
Total Output Current: 5 V, 3.1 A

Languages

Sounds

Advertising