myCharge Sojourn 1000 RFAM-0194 - Manual (Page 3)

4 5
Thanks for choosing myCharge.
In The Box
• myCharge Sojourn
• Lanyard
• Owner’s Manual
• Warranty Manual
Section I: Quick Start
1. Charge up your Sojourn by plugging it into a USB power
adapter or computer. As Sojourn charges, LEDs on
the unit will sequentially illuminate. When the unit is fully
charged, all LEDs are lit. Press the level check button to
see how much power is available.
2. Connect your iPod or iPhone to the Apple Dock
Connector.
3. Unplug your iPod or iPhone when it’s charged and go!
Your Sojourn will automatically power off after your
device is unplugged.
Section II: Charging Sojourn
To charge your Sojourn, connect it to a USB power source
(Apple iPhone adapter, notebook USB port) with the on-
board green USB input cable. Times to charge the Sojourn
vary based on what it’s plugged into. You can expect a full
charge from an iPhone USB adapter in about an hour and
a half, or from a standard notebook USB port in about two
and a half hours.
Note: It is normal for your Sojourn to be warm to the touch
while in use.
USB Charging
Cable
Apple Dock
Connector
Charge from a USB power adapter or your computer
OUT
Multifunction
Button
LEDs