myCharge Summit 3000 RFAM-0165 - Manual (Page 5)

8 9
Section VI: Sound Modes
Summit has built-in voice and tone capability. Tone mode
will audibly inform you when devices are plugged in
or disconnected, and when the unit is charging or has
completed charging. Voice mode will verbally inform
you of battery status, when devices are plugged in or
disconnected, and when the unit is charging or has
completed charging.
To disable, enable and/or change the various sound modes
1. Locate the Sound pinhole button underneath the Apple
30-pin Connector
2. Plug Summit into your PC
3. Use a paperclip to cycle Voice Tone Silent Voice
If you prefer no sound, toggle to the silent mode - unit will
make no sound when this option is selected. If you prefer
tone mode, toggle until you hear the tone. Finally, if you
prefer language, toggle until you hear a voice.
Summit offers language notifications in 4 languages –
English, French, Spanish and Portuguese. To select a
language locate the language pinhole and use a paperclip
to toggle through the languages until you hear the
language you prefer.
Section VII: Maintenance
To keep Summit operating at its full potential, please do
the following:
1. Re-charge every three months when not in use.
2. Keep dry and away from moist and corrosive materials.
3. To clean, wipe surface with dry cloth.
Section VIII: Product Specifications
Battery: 3000 mAh Lithium Polymer
Input:
AC: 100-240 VAC 50/60 Hz
USB-A: 5 VDC, 2.1 A
Output:
Apple 30-pin: 5 V, 2.1 A
USB-A: 5 V, 1.0 A
Micro-USB: 5 V, 1.0 A
Total Output Current: 5 V, 2.1 A
Languages Sounds