myCharge Voyage 1000 RFAM-0206 - Manual (Page 3)

4 5
Thanks for choosing myCharge.
In The Box
• myCharge Voyage
• Lanyard
• Owner’s Manual
• Warranty Manual
Section I: Quick Start
1. Charge up your Voyage by plugging it into a USB power
adapter or computer. As Voyage charges, LEDs on
the unit will sequentially illuminate. When the unit is fully
charged, all LEDs are lit. Press the level check button to
see how much power is available.
2. Connect your device to the Micro-USB connector.
3. Unplug your device when it’s charged and go! Your
Voyage will automatically power off after your device is
unplugged.
Section II: Charging Voyage
To charge your Voyage, connect it to a USB power source
(USB-A to wall adapter, notebook USB port) with the on-
board green USB input cable. Times to charge the Voyage
vary based on what it’s plugged into. You can expect a full
charge from a USB adapter in about an hour and a half, or
from a standard notebook USB port in about two and a half
hours.
Note: It is normal for your Voyage to be warm to the touch
while in use.
OUT
USB Charging
Cable
Multifunction
Button
Micro-USB
Connector
LEDs
Charge from a USB power adapter or your computer