Cabletron Systems Network Router - Manual (Page 26)

Installing SPECTRUM for Solstice Enterprise Manager
2-8 Installing SPMA
The Install Platform Selection window, Figure 2-1 , will be
displayed.
Figure 2-1. The Install Platform Selection Window
2. Click in the appropriate fields to select the operating system and
network management system (if applicable) on which you will be
running the SPMA applications. Based on information read from
your workstation, these fields will try to default to the correct
values; be sure to check the default settings and change them if
necessary.
3. Click on Next to proceed with installation; the Install Product
Selection window,
Figure 2-2 , will appear. You can use this
window to select only those applications that you need, or you
can leave the default selections and install the entire SPMA
product. The associated document files will be automatically
installed for each selected module. Click mouse button 1 on any
module to select or de-select it. Note that the Core option cannot
be de-selected; core application and documentation files will be
installed automatically each time the installation procedure is run.
You can also double-click on the list box title to select all available
options.
00-Instl_SEM-Solaris_Book Page 8 Monday, October 5, 1998 11:41 AM