Cabletron Systems Network Router - Manual (Page 47)

Getting Started
Configuring Cabletron Glyph Properties 3-7
For a manually-created glyph, you must assign a glyph Name (either
the IP address or hostname associated with the device you wish to
model) and supply the appropriate community names (both the
sNMPusrRdCommunity
and sNMPusrWrCommunity for
older-generation devices, or just chassisusrCommunity for newer
devices). For a discovered glyph, you may need to edit the default
community name(s) provided. And for either kind of glyph, you may
want to specify the MIB agent (ASN1 and GBMO) Þles that will
provide the Solstice SNMP Browser tool with access to the modeled
deviceÕs MIB information.
Assigning a Device Name
For manually-created glyphs, you must assign a Name value that
Solstice Enterprise Manager (and SPMA) can use to contact the
device; this can be either an IP address or a hostname. Once this name
is assigned, it cannot be changed.
To assign a name, enter the appropriate value in the Name Þeld in the
top portion of the window, then click on the Add button or press
Return. The Name you have assigned will appear in the list box
directly above the name Þeld.
NOTE
When you manually create a glyph using the Object Palette, the glyphÕs
Configuration Tool window will appear automatically.
TIP
You can add multiple glyphs of the same type by adding additional
hostnames or IP addresses in the Name field; see your Solstice Enterprise
Manager documentation for details.
00-Instl_SEM-Solaris_Book Page 7 Monday, October 5, 1998 11:41 AM