Compaq Labtec LCS 800 - Manual (Page 2)

AlphaServer 800 Pedestal–Rackmount
2.26 Alpha Servers
Step 1—AlphaServer 800 Pedestal and Rackmount Package Systems
Configuration menus require the mandatory selection of:


DIGITAL UNIX Packaged System from Step 1a, or

OpenVMS Packaged System from Step 1b, and

Minimum of one Ethernet Adapter and one UltraSCSI disk from Step 1c
Note: See Step 7 for M-series Cabinet Enclosure configuration rules
Pedestal and Rackmount Systems include


Alpha microprocessor 21164 500 MHz CPU with
2 MB onboard ECC cache

Pedestal enclosure with
-
Six expansion slots: three PCI and one PCI/EISA
combo and two EISA
- Onboard UltraSCSI adapter supports internal
removable media (CD-ROMs and tapes) and internal
storage shelf only
- Onboard S3 SVGA Graphic
- 8 DIMM memory slots support 2 memory kits
- Eight storage slots
One diskette drive slot with 1.44 MB floppy drive
One CD-ROM drive slot with 600 MB CD-ROM
Two additional half height (or one full height)
removable media slots
Four SCA-2 UltraSCSI hard drive slots
- Two serial ports: One serial port with full duplex
asynchronous modem control; one RMC dedicated
serial port with full duplex asynchronous modem
control.
- One bi-directional enhanced parallel port
- PS/2 style keyboard port and mouse port


350 W switchable (120/240 V, 60/50 Hz) power supply

3-button mouse.

120 V power cord. Select country-specific power cord
for all non North American orders.

US English documentation.

Integrated Advanced Server Management features,
including ServerWORKS Manager kit.

DIGITAL UNIX Unlimited User license, Server
Extension license, Internet AlphaServer System software
kit, or

OpenVMS base license with System Manager license,
Enterprise Integrated Package

Hardware warranty: three-year onsite 1

Software Warranty 1


90-day SPD conformance with advisory telephone
support for DIGITAL UNIX and Open VMS.
1. Service upgrades are available. See Step 10.
Note: Rackmount packaged systems must be installed in a cabinet. System can be installed in an existing cabinet or select
a cabinet from Step 7.