Canon A80 - Manual (Page 36)

32
• You will hear a start-up sound and see the start-up image
when the power is turned on. (To change the start-up
sound and image, see below and pages 157 and 176.)
• The start-up image does not appear when the LCD
monitor is off or the camera is connected to a TV.
Turning on the camera without the start-up sound and
image
Press and hold the
button, then turn on the power.
Power Saving Function
This camera is equipped with a power saving function.
When this function is turned on and it activates, restore
power by pressing the ON/OFF button.
Shooting Mode
The power will automatically turn off approximately 3
minutes after the last function is accessed. The LCD
monitor will turn off approximately 1 minute* after the last
function is accessed. Press any button other than the ON/
OFF button to turn the LCD monitor back on.
* This time can be changed (p. 173).
Playback Mode
The power will automatically turn off approximately 5
minutes after the last function is accessed.
While Connected to a Printer
The power will automatically turn off after approximately
5 minutes of inactivity for both the camera and the printer.
• The power saving function will not activate while the
camera is in Auto Play mode or during a computer
connection (p. 134, 150).
• You can turn off the power saving function in the [
(Set up)] menu (p. 173).