Cabletron Systems ESXMIM - Manual (Page 24)

Chapter 2: Local Management Requirements
Page 2-4 ESXMIM/ESXMIM-F2 Local Management Guide
2.3 ESTABLISHING A TELNET CONNECTION
Once the ESXMIM has a valid IP address, you can establish a Telnet
session with Local Management from any TCP/IP based node on the
network. Telnet connections to the host device require the community
name passwords assigned at the SNMP Community Names screen. Refer
to Chapter 5, The SNMP Community Names Screen, for additional
information about community names.
NOTE
See the instructions included with the Telnet application for
information about establishing a Telnet session.