Cabletron Systems ESXMIM - Manual (Page 31)

The Setup Menu Screen
ESXMIM/ESXMIM-F2 Local Management Guide Page 3-7
The Setup Menu displays the following menu items:
• System Level – The System Level Setup screen allows you to
configure basic operating parameters for the ESXMIM.
• SNMP Community Names – The SNMP Community Names Setup
screen allows you to change or review the community names used as
access passwords for local management operation.
• SNMP Traps – The SNMP Traps Setup screen provides display and
configuration access to the table of IP addresses used for trap
destinations and associated community names.
• FLASH Download – The FLASH Download setup screen allows you
to configure the ESXMIM for a download of new firmware and
perform the download operations.
• Bridge Setup – The Bridge setup screen allows you to select a
Spanning Tree method for the ESXMIM bridging operations and
enable or disable individual bridge ports.
• Device Specific Setup – The Device Specific setup screen allows you
to set the connection method (backplane or front panel) used for
interface 1 of the ESXMIM.