Cabletron Systems ESXMIM - Manual (Page 19)

Navigating Local Management Screens
ESXMIM/ESXMIM-F2 Local Management Guide Page 1-9
1.8 NAVIGATING LOCAL MANAGEMENT SCREENS
To navigate within a Local Management screen, use the arrow keys of the
terminal or the workstation providing terminal emulation services. The
Local Management screen cursor responds to the LEFT, RIGHT, UP, and
DOWN arrow keys. Each time you press an arrow key, the Local
Management screen cursor moves to the next available field in the
direction of the arrow key.
The Local Management screen cursor only moves to fields which can be
selected or used for input. This means that the cursor jumps over display
fields and empty lines on the Local Management screen.
The Local Management screen cursor provides wrap-around operation.
This means that a cursor located at the edge of a screen, when moved in
the direction of that edge, “wraps around” to the outermost selectable
item on the opposite side of the screen which is on the same line or
column.
Arrows These are navigation keys. Use the
UP-ARROW, DOWN-ARRROW,
LEFT-ARROW, and RIGHT-ARROW
keys to move the screen cursor. For
example, “Use the arrow keys”
means to press whichever arrow key
moves the cursor to the desired field
on the Local Management screen.
[+/=] This key increments values in some
Local Management selection fields.
For example, “Press [
+/= ]” means to
press the plus/equal key.
[ – ] This key decreases values from some
Local Management selection fields.
For example, “Press [
– ]” means to
press the minus key.
DEL The DEL (Delete) key removes
characters from a Local Management
Selection field. For example, “Press
DEL” means to press the delete key.
Table 1-2 Keyboard Conventions (Continued)