Outdoor Great Room San Juan Fire Pit - Manual (Page 5)

5 | P a g e
Gas Connection
1. Connect the incoming black rubber gas hose
to the valve. It is not recommended to use
Teflon tape or pipe dope on the connection
to the valve with flare fittings.
 LP installations use the hose and regulator
provided with the burner.
 Natural Gas installations refer to the
supplied Crystal Fire Manual.
Attach incoming
gas here
Use two wrenches to fully tighten gas
connections.
Do not make gas connections to burner until concrete, tile, or
granite top is installed. Gas connections can be made from
below or from above by lifting burner out of top to access gas
line.