Outdoor Great Room GE-94 - Manual (Page 5)

5
90236 GE50-94 REV A 8-3-12
INSTALLING YOUR FIREPLACE
Wall mounting bracket installation：
1. Open the box and take out the wall mounting bracket.
2. Choose a solid and plain wall and put the bracket in the position where you want to install the fireplace. Mark the
holes with a pen (6 for GE-50/58, 8 for GE-70/94) using the holes in the mounting bracket as a guide (Fig. 3)
3. If locating the fireplace on existing wall studs or solid wood walls, Screws can be inserted at this time and you can
proceed to step 6, otherwise continue the steps below for placing wall anchors.
4. Take away the bracket and then, using a n 8mm or ¼” drill bit, drill holes in the wall. Put the plastic wall anchors into
the holes. (Fig. 4)
5. Insert ST5×40 screws to secure the bracket to wall (Fig. 5)
Fig. 3 Fig. 4
Fig. 5
IMPORTANT: Install in the
orientation shown with mounting
hooks at the TOP of bracket as
shown by arrows
16in/406mm 16in/406mm