PDR Mounts cpm100 - Manual

M odel
Thank you for purchasing the PDR product
To ensure the correct usage, please read and follow the instructions manual thoroughly. Please store the instructions in a safe place for future reference.
To ensure customer safety, be sure to decide the installation location so that the strength is sufficient to withstand the weight of both the panel
display and the mount.
Always use at least two persons for all installations.
Fully tighten all of the mounting screws as specified in the installation instructions.
Features
Special techniques are necessary for installation of the panel display mount.
Do not attempt to perform this work by yourself.
Request an installation specialist to install this unit.
Manufacturer assumes absolutely no responsibility for injuries and damages that may occur due to improper installation and handling.
Please remember that if you remove the ceiling mount from the ceiling later, you will find the screw holes left by any anchor bolts.
1
Mounts by
A division of David Engineering & Mfg. Inc.
CPM-100 CEILING PIPE MOUNT
All PDR mounts and adapters carry a limited lifetime warranty from ship date against defects in material and workmanship.
Check the PDR website for details @
www.PDRmounts.com. We are not liable for improper installation that results in damage
to mounts, adapters or presentation equipment.
! Used with standard 1 ½” Pipe (not supplied)
!
Can be used on a flat or vaulted ceiling, rotates 90 degrees
!
100mm VESA hole pattern, or Can be used with any PDR mount
!
Easy cable access
!
500 lb load rating
45°
TO A FULL 90°
FLAT (0°) THROUGH
CPM100 ADJUSTS FROM
90°
SAFETY SCREW