PDR Mounts fcp50 User Manual
Mounts by, Fcp-50 false ceiling plate kit
M
odel
Thank you for purchasing this PDR product
To ensure the correct usage, please read and follow the instruction manual thoroughly. Please store the instructions in a safe place for future reference.
To ensure customer safety, be sure to decide the installation location so that the strength is sufficient to withstand the weight of both the projector
and the false ceiling plate kit (FCP).
Always use at least two persons for all installations.
Fully tighten all of the mounting screws as specified in the installation instructions.
Special techniques are necessary for installation of the panel display mount.
Do not attempt to perform this work by yourself.
Request an installation specialist to install this unit.
Manufacturer assumes absolutely no responsibility for injuries and damages that may occur due to improper installation and handling.
1
FCP-50 FALSE CEILING PLATE KIT
All PDR mounts and adapters carry a limited
lifetime warranty against defects in material and workmanship.
We are not liable for improper installation that results in damage to mounts, adapters or presentation equipment.
Suitable for mounting above 2’ x 2’ or 2’ x 4’ ceiling tiles
Mounts by
A division of David Engineering & Mfg. Inc.