Petsafe Anti-Bark Spray Collar - Manual (Page 6)

6 www.petsafe.net
EN
FR
NL
ES
IT
DE
Key Defi nitions
Spray Nozzle: Where the
spray ejects when your dog’s bark
is detected.
Refi ll Port: Where the spray
is refi lled.
Battery Cover: Where the 6-volt
Alkaline Battery is placed.
Microphone: Detects the sound of
your dog’s bark.
ON (l) and OFF (O) Switch: Turns the Bark Control Collar ON (l) and OFF (O).
STEP 1
Fit the Bark Control Collar
Important: The proper fi t and placement of your Bark Control
Collar is important for effective operation.
To assure a proper fi t, please follow these steps:
1. Make sure that the Bark Control Collar is turned OFF (O).
2. Start with your dog standing comfortably (A).
3. Place the Bark Control Collar on your dog’s neck close to the
ears. Centre the Microphone on your dog’s
neck, touching the skin (B). Make sure the
PetSafe
® logo in the front of the Bark Control
Collar is upright and the Spray Nozzle is pointed
toward your dog’s snout.
4. Check the tightness of the Bark Control Collar
by inserting one fi nger between the nylon collar
and your dog’s neck (C). The fi t should be snug
but not constricting.
5. Allow your dog to wear the Bark Control
Collar for several minutes, then recheck the fi t.
Check the fi t again as your dog becomes more
comfortable with the Bark Control Collar.
6. Trim the nylon collar as follows (D):
a. Mark the desired length of the nylon collar with a pen. Allow for growth if your dog
is young or grows a thick winter coat.
Refill Port Spray Nozzle
Battery
Cover
Microphone
ON (I) /OFF (O) Switch
(Bottom View)
B B
C
YES
NO
A A