Petsafe Deluxe In-Ground Cat Fence™ Extra Receiver Collar - Manual (Page 3)

www.petsafe.net 3
Prepare the Receiver Collar
To Insert and Remove the Battery
Note: Do not install the battery while the Receiver Collar is on your pet.
This Receiver Collar utilizes a replaceable PetSafe ® battery (RFA-188). This unique battery is
designed to make battery replacement easier and increase water protection.
To activate the collar, insert the battery module (A). Using the edge of the Test Light Tool as
shown, turn the battery clockwise until the vertical line on the battery is pointed to the “ON”
position (B). If the PetSafe Receiver Collar is not going to be used on the cat immediately,
leave it in the “OFF” position.
To remove the battery, turn the battery counter-clockwise using the edge of the Test Light
Tool as shown (C, D). DO NOT attempt to cut into or pry open the battery. Be sure to
discard the used battery properly.
A replacement PetSafe battery can be found at many retailers. Contact the Customer Care
Center at 1-800-732-2677 or visit our website at www.petsafe.net to locate a retailer near you.
A B D C