Petsafe Drinkwell® 360 Stainless Steel Pet Fountain - Manual (Page 6)

www.petsafe.net 7 6 www.petsafe.net
EN
NL
IT
FR
ES
DE
.
Key Definitions
Bowl: The stainless steel Bowl is the foundation of the Pet Fountain. The circular Bowl
piece can be carried by simply gripping underneath the sidewalls of the Bowl.
Cone: The stainless steel Cone serves as the housing for the Pet Fountain components
and encloses the Pump from curious pets. The Cone acts to reduce the splash and sound
of the falling water.
filter Housing: The Filter Housing slides into the opening at the top of the Cone and its
main purpose is to hold the Charcoal Filter in place.
Charcoal filter: The cylindrical Charcoal Filter features a pull-tab at the top and
should be placed in the Filter Housing with the tab facing upwards for easy placement
and removal.
foam filter: The Foam Filter collects hair, debris and pet food before they reach the
Pump. It is important to use the Foam Filter as it helps maintain proper Pump function.
filter Housing Lid: The Filter Housing Lid is a screw on lid that attaches to the Filter
Housing to keep the Charcoal Filter in place. It serves as the base piece to attach the
interchangeable Spout Rings & Flow Control Cap.
Spout rings: The five interchangeable Spout Rings can be easily changed based
upon your pet’s preference and can provide up to 5 streams of water for multiple
pet households.
flow Control Cap: The Flow Control Cap is attached to the top of the Pet Fountain and
easily adjusts the flow of water by turning the Flow Control Cap to the left or right. Turn to
the right, to increase the flow of water. Turn to the left to decrease flow.
pump: The small submersible aquarium Pump can be dismantled for cleaning.
Important: THE PUMP IS NOT DISHWASHER SAFE! Remove Pump from Pet Fountain
prior to cleaning (See “Pump Maintenance”). The Pump also features an In-Line Plug for
easy attachment and removal.
Cord Clips: The three plastic Cord Clips serve to cover the electrical Power Cord as it
feeds over the rim of the Bowl and these Cord Clips are required to hold the Cone piece
in place.