Petsafe Innotek FieldPro Remote Trainer - Manual (Page 6)

FieldPro Owner’s Manual 6
SCOUT ™ Quick Start Guide
Step 1
Install Transmitter Batteries and Charge Receiver
1 1.. Plug the AC Adapter into a
110VAC outlet.
2 2.. Connect the AC Adapter to the
Receiver Cradle.
3 3.. Put the Receiver on the Receiver
Cradle as shown. The light on the
Receiver glows red while
charging, and glows green when
fully charged.
4 4.. Install Transmitter Batteries:
• Remove the battery cover from
the back of the Transmitter.
• Insert 3 AAA alkaline batteries
(oriented as shown in battery
compartment).
• Replace the battery cover.
• When the batteries are put in, the
Scout Transmitter is in battery
conservation mode; press any
button to activate the transmitter.
2 2
4 4
Note battery polarity when installing batteries.
to Receiver Cradle
1 1
SCOUT
™
Quick Start Guide
To maintain maximum range,
keep the Transmitter antenna
away from all magnets (there is a
magnet in the Charging Cradle).
3 3
LED LIGHT
+ + — — + +
— — + + — —