Petsafe Innotek UltraSmart Micro Remote Trainer - Manual (Page 8)

About 2 Dog Systems
If you purchased the IUT-302, your system came complete
with two collars. Take the first collar, set your remote to
D
,
and turn it on with the
p
button. Set it down, then take the
second collar, set your remote to
d
, and turn it on. The
remote will send a signal to whichever collar appears in the
remote display window. To switch between collars, press
the
C
button.
If you purchased the IUT-300 system, and wish to add another
collar, accessory collars are available where you bought your
training system,or call 1-800-826-5527 to order direct from us.
Testing the Collar
You may wish to test the collar from time to time. To test:
• Hold the test light provided across the collar’s metal contacts
• Press the stimulation button on the remote
• The test light will illuminate
• The intensity of the test light will increase as the level increases
Replacement batteries:
Your remote uses a replaceable 12v alkaline battery (23A or
A23). These are commonly available where you bought
your training system, where batteries are sold, or call
1-800-826-5527 to order direct from us.
Operating Range
Your remote communicates with your pet’s collar via a radio
signal. A variety of factors may affect your system’s
operating range, positively or negatively. These include
weather, terrain, vegetation, proximity to metal structures
including buildings and fences, and other factors. Some
things like outside radio interference and emissions will
diminish your range.
6