Petsafe Pawz Away® Outdoor Pet Barrier - Manual (Page 5)

www.petsafe.net 5
Operating Guide - Wireless Option
Power Up the Barrier Transmitter
Locate the battery door on the bottom of the Barrier Transmitter. Loosen the 4 Phillips
head screws. The screws will stay in the battery lid. Install 4 alkaline D-batteries and
replace the battery door.
Under normal conditions, the batteries will operate the transmitter for up to one year. Test
the system every month to ensure it is working properly.
Set Up the Barrier Transmitter
Important: Never perform set-up procedures while your pet is wearing the
Receiver Collar.
Turn the Barrier Transmitter upright and open the lid 1.
exposing the LCD display and range buttons.
Press the up (+) button once to turn ON the Barrier
2.
Transmitter. A black segment in the bottom of the
LCD display indicates the unit is set to the lowest
range (1A).
Each segment represents approximately two feet of
3.
diameter. You can create a Barrier Area up to 16 feet
in diameter. Using the up (+) and down (-) buttons,
adjust the range to fi t the desired pet Barrier Area.
1A
Step
1
Step
2