Petsafe Stubborn Dog In-Ground Fence™ System User Manual
Page 2
2
Quick Start Guide for Installing Your System
The Standard Pet Containment System is simple and easy to use. Follow these
8 easy steps. Additional details can be found on the following pages.
1
2
4
3
5
Layout
Make a layout that is suitable for your yard. Refer to
sample layouts under "Laying Out Your System"
Locating and mounting
the Fence Transmitter
Mount the fence transmitter in a dry location. A
mounting template is located on the back cover of
this manual.
Layout the Boundary Wire
Lay the boundary wire above the ground according
to your layout. Insert stripped wire ends into wire
terminals of the transmitter.
Remove the Receiver Cover
from the Receiver
Using a Phillips head screwdriver, remove the four
screws from the back cover and take the cover off of
the receiver.
Insert the Battery into the Receiver
Once open, connect a 9-volt alkaline battery to the
battery connector. Place the connected battery into the
receiver and replace the back cover.
ENGLISH
400-525-19 XW
9/24/03, 9:59 AM
2